Precision-engineered curtain walls, 3D sculptural paneling, and thermally enhanced aluminum facade solutions tailored for infrastructure, commercial, and high-rise developments across Algeria.
As Algeria accelerates its commercial modernization, urban vertical expansion, and infrastructure developments across metropolitan hubs such as Algiers, Oran, Constantine, and Annaba, the architectural demand for advanced structural glass facades and thermally broken aluminum curtain wall systems has reached an unprecedented scale. However, the Algerian geographical landscape poses singular engineering challenges: the northern coastal corridor requires rigorous resistance against high relative humidity and severe marine salt spray, while the inland high plateaus and southern Saharan territories subject building envelopes to extreme solar radiation (UV flux exceeding 2,200 kWh/m²/year) and massive diurnal temperature fluctuations ranging from sub-zero winter nights to daytime summer peaks over +50°C.
As premier international glass facade manufacturers and global exporters, our organization bridges the gap between ambitious architectural concepts and physical, long-term structural reliability. Utilizing vertical integration—from single-source extrusion, precision CNC machining, and automated thermal breaking to double/triple glazed insulated glass unit (IGU) assembly—we manufacture building envelope systems engineered specifically to satisfy both international building codes (CSA A440, AAMA 501, EN 13830) and local Algerian thermal regulations (DTR C3-2 / C3-4 guidelines enforced by CNET).
Selecting the ideal facade assembly requires matching material metallurgy, structural depth, and optical performance indicators to the exact structural height, wind exposure category, and thermal envelope targets of your project.
Fabricated with AA6063-T6 architectural aluminum profiles. Systems integrate pressure-equalized rain-screen drainage channels, continuous EPDM gaskets, and warm-edge double-glazed spectrally selective glass.
Engineered 3D geometric wall panels utilizing 3.0mm AA3003-H24 aluminum alloy sheets. Custom faceted geometry breaks up wind eddy currents while delivering striking parametric aesthetic elevations.
Precision CNC laser-cut perforated panels designed for dual-skin facade integration. Provides micro-shading (SHGC reduction up to 45%) while serving as modern interpretation of traditional Mediterranean Mashrabiya screens.
To assist architectural specifiers, general contractors, and procurement directors in Algeria, the following matrix summarizes our standardized curtain wall and exterior metal cladding specifications verified through certified laboratory testing.
| System Classification | Aluminum Profile Alloy & Temper | Thermal Isolation System | Glazing Specification / Optical Target | Wind Load Resistance | Algeria Regional Suitability |
|---|---|---|---|---|---|
| Stick Curtain Wall (CW-600) | AA6063-T6 (Tensile ≥ 205 MPa) | Polyamide PA66 GF25 (24mm Thermal Break) | 6mm Low-E + 12A + 6mm Clear (U-value ≤ 1.4 W/m²K) | Up to 3.0 kPa (ASTM E330) | Algiers, Oran (Coastal High-Rise Towers) |
| Unitized Structural Glazing (SG-800) | AA6061-T6 Heavy-Duty Profile | Multi-Chamber Structural Foam + EPDM Triple Gasket | 8mm Solar Control Low-E + 16A Argon + 8mm Toughened (SHGC ≤ 0.22) | Up to 3.5 kPa (EN 13830) | Saharan Commercial Centers (Hassi Messaoud, Ouargla) |
| 3D Faceted Aluminum Cladding | AA3003-H24 (3.0mm Sheet Thickness) | Ventilated Cavity with Mineral Wool Insulation | PVDF 3-Coat 70% Kynar 500 Finish (>40 Micron Coating) | Class A Structural Load | Nationwide Modern Architecture & Cultural Landmarks |
| Laser-Cut Perforated Screen Panel | AA5052-H32 Marine Grade | Air Barrier & Secondary Shading Mounts | Anodized 25 Micron / Custom Powder Coated (AAMA 2605) | Calculated per Open Area Ratio | High Plateau Regions (Constantine, Sétif) |
| Wood Grain & Kinetic Panels | AA3003 / AA6063 Architectural Grade | Thermally Decoupled Mechanical Fasteners | Fluoropolymer Heat Transfer Film (Anti-UV, Fade-Proof) | Up to 2.5 kPa | Hospitality, Resort Facades & Commercial Plazas |
Building in Algeria requires specialized engineering adjustments depending on geographic installation coordinates:
1. Coastal Metropolitan Zone (Algiers, Oran, Skikda, Mostaganem): High atmospheric salt content combined with humidity requires C5-M anti-corrosion surface treatments on all structural connectors and frame extrusions. Stainless steel fasteners must be upgraded to 316-grade, while glass units utilize dual-sealed silicone systems (polyisobutylene primary seal, structural silicone secondary seal) to eliminate moisture ingress into the insulating glass cavity.
2. Tell Atlas & High Plateaus (Constantine, Sétif, Batna): Experience dramatic winter freezing conditions paired with high summer heat. Thermal bridging must be completely eliminated to prevent condensation formation on internal aluminum framing. Our thermal break profiles maintain thermal performance even when exposed to severe temperature gradients across interior and exterior surfaces.
3. Saharan & Arid Industrial Zones (Ouargla, Hassi Messaoud, Ghardaïa, Adrar): The primary engineering imperative is solar radiation blocking and dust protection. Solar Heat Gain Coefficient (SHGC) values must be tuned below 0.24 to keep interior HVAC power loads manageable. Additionally, framing gaskets utilize continuous, vulcanized EPDM seals engineered to resist degradation caused by abrasive airborne sand particles and intense UV radiation.
Procuring architectural facade packages internationally requires absolute certainty in manufacturing tolerances, delivery logistics, and contractual compliance. Backed by over 35 years of in-house manufacturing, extrusion, structural testing, and field installation experience, our company provides single-source accountability from initial architectural shop drawing submittals to final delivery at the Port of Algiers, Oran, or Bejaia.
Every lot undergoes rigorous QC sign-off: structural deflection testing, water tightness verification, thermal camera scans, and dry film thickness (DFT) measurement on all anodized/PVDF surfaces.
Glass units and extrusions are packed in heavy-duty, fumigated wooden crates lined with moisture barrier foils. Shipments are bundled floor-by-floor matching your site erection sequence to streamline logistics.
Our dedicated engineering department drafts complete CAD/BIM facade submittal packages, anchor calculation reports, and thermal performance calculations for consultant approval.
Below are authoritative responses to common logistical, technical, and commercial questions raised by property developers, main contractors (BTPH), and architectural firms operating in Algeria.
Yes. Our engineering submittals are customized to meet or exceed Algerian Document Technique Réglementaire (DTR C3-2 / C3-4) requirements for thermal insulation in building envelopes. We provide complete thermal calculations (U-factor, SHGC, LT%) and structural wind load certifications matching CNET (Centre National d'Études et de Recherches Intégrées du Bâtiment) evaluation criteria.
We have extensive experience operating under Central Bank of Algeria foreign trade regulations. We support confirmed, irrevocable Letters of Credit (L/C at sight) and provide all mandatory customs documentation including Certificates of Origin, SGS/TÜV Quality Inspection Certificates, Commercial Invoices, Packing Lists, and Bill of Lading (B/L) issued for customs clearance at Algiers, Oran, or Bejaia ports.
For high-solar-radiation zones such as Ouargla, Hassi Messaoud, and Adrar, all glass panes undergo full thermal tempering (heat treatment per ASTM C1048 / EN 12150) along with polished edge work to eliminate micro-cracks. We also utilize spectrally selective Low-E coatings on surface #2 of double-glazed units, reflecting long-wave infrared heat while permitting high visual light transmission (VLT).
Absolutely. Our manufacturing plant operates advanced 5-axis CNC laser cutting, bending, and robotic welding stations. We can directly ingest REVIT, Rhino, AutoCAD, or IFC models to manufacture complex 3D faceted, curved, or laser-perforated aluminum facade panels with millimeter precision, finished in custom RAL colors or wood-grain PVDF transfers.
Following shop drawing approval and sample sign-off, standard production cycle time is 3 to 5 weeks depending on project square footage. Sea freight transit from our main manufacturing port to major Algerian ports (Port of Algiers, Oran, Bejaia) typically ranges between 20 to 30 days. Shipments are packaged in sequence to allow immediate floor-by-floor installation upon arrival on site.
Yes. In addition to delivering fully engineered pre-fabricated unitized or stick curtain wall packages, we offer remote technical support or can send experienced senior glazing engineers on-site to direct your local installation crews, oversee anchor positioning, verify perimeter sealing integrity, and assist with initial field water-testing.